Installing and Configuring Telephony
Manager
⎯have a Next feature button administered on your telephone, depending on your type of telephone. If you have a 6400 Series telephone without a display, you must have a Next feature button administered on your telephone. However, if you have a 6400 Series telephone with a display, you do not need a Next feature button administered on your telephone.
If you do not use the Auto Config button, you will use the Phone Line dialog box to specify the location and type for each call appearance on your telephone. You can specify the following types of call appearances:
⎯Primary Line, which is the extension of your telephone.
⎯Bridged Line, which is the extension of another person’s telephone to which you have full access (that is, you can “bridge” onto calls appearing at that person’s telephone).
⎯Monitored Line, which is the extension of another person’s telephone for which you can monitor the status (that is, in use, on hold, or inactive).
2.Perform one of the following steps:
⎯If you want to manually configure the PassageWay Configurator, proceed to Step 3.
⎯If you want to automatically configure the PassageWay Configurator, perform the following steps:
a.If you have a 6400 Series telephone with a display, proceed to Step c.
If you have a 6400 Series telephone without a display, choose the button where the Next feature button is located on your telephone.
A submenu appears.
