127
Triggering Examples
Cross-Arming Trigger Examples
7Check that the second analyzer is triggering on arm and that Count Time is set.
After the measurement is complete, you can interleave the trace lists of
both state analyzers to see the activity executed by both coprocessors
during related clock cycles.
You can use a similar procedure if you have only one processor, but
want to monitor its activity with that of other system nodes, such as
chip-select lines, I/O activity, or behavior of a watchdog timer. In some
instances it may be easier to look at related activity with a timing
analyzer.
See Also "Special Displays" on page 128.
"To trigger timing analysis of a count-down on a set of data lines" on
page 125.