Agilent Technologies 1670G To mount the logic analyzer

486

Connecting and Configuring the LAN

To mount the logic analyzer

NOTE: Before Mounting

You need to wait at least 15 seconds after the Analyzer Configuration menu is

displayed before attempting to mount. If you try to mount too soon, you will

receive an error message.

You can mount the logic analyzer on your network for two different

levels of use, control or data. The logic analyzer accommodates one

control user and multiple data users. Control allows users to read and

write files to and from the analyzer, while data allows users to only read

files from the file system. Data users can also write files to the disk

drives of the logic analyzer.

If you have trouble, refer to chapter 7, "Troubleshooting."

For the exact syntax of the mount command for mount, refer to your

network documentation.

NOTE: Mounting and Unmounting

You must unmount the logic analyzer before turning it off. After unmounting,

you can mount the analyzer 15 seconds after the Analyzer Configuration menu

is displayed when powering up the instrument. You can write a network script

that executes an unmount and mount procedure.