78
Using the Trigger Menu
Changing the Trigger Sequence
To add sequence levels
You can add sequence levels anywhere except after the final one.
1In the Trigger menu, select the number beside the sequence level
just after where you want to insert.
For example, if you want to insert a sequence level between levels 1
and 2, you would select level 2. To insert lev els at the beginning, select
level 1.
A Sequence Level pop-up appears. Its exact contents depend on the
analyzer configuration and the level specification. However, all
Sequence Level pop-ups have an Insert Level field in the upper left
corner.
2Select Insert Level.
Another pop-up offers the choices of Cancel, Before, or After. If the
level you started from was the last level, After will not appear.
3Select Before.
The Trigger Function pop-up replaces the Sequence Level pop-up. The
functions available depend on whether the analyzer is configured as
state or timing.
4Use the knob to highlight a trigger function, and select Done.
A new Sequence level pop-up appears. Its contents reflect the trigger
function you just selected. The figure below shows a user trigger
function for a state analyzer.