280
Logic Analyzer Reference
Disk Drive Operations
Load and Store
When you choose Load or Store, you next need to set the field
immediately to the right. This field presents at least three choices: All,
System, and Analyzer. If you have other software loaded, it might add
to the list of choices.

All

Choose All to store or load both system and analyzer information. If
you are storing, two files (one for the system and one for the analyzer)
are created. The system file ends in "._ _" and the analyzer file ends in
"._A".

System

System files store system configurations. System information for the
1670G-series consists of settings for printer, controller, RS-232-C,
GPIB, shade, and sound. LAN settings are not saved. System
configuration files end in two underscores and have a file type of
167x_cnfg.

Analyzer

Analyzer configuration files store measurement setups, including data.
If you are storing the current measurement and an inverse assembler is
already loaded, when you reload the file you are now creating it will try
to pull in the inverse assembler. Other attributes stored in analyzer
configuration files include labels, trigger sequence, arming
configuration, measurement data, markers, analyzer names, and pod
assignments. Analyzer configuration files end in "._A" and have a file
type of 167xan_config.