129
Triggering Examples
Special Displays
To interleave trace lists
1Set up both analyzers as state analyzers.
2Go to the Trigger menu of the first analyzer.
3Set Count to Time, and set up the trigger.
The logic analyzer uses the time tags stored with each state to
determine the ordering of states shown in an interleaved trace list.
4Set Count to Time, and set up the trigger on the second
analyzer.
The second analyzer does not need to be run from the first analyzer,
but both analyzers must have "Count Time" turned on to correlate the
data.
5Make the measurement run.
6Go to one of the Listing menus.
7Select one of the label fields in the trace list display, then select
Interleave.