72
Using the Trigger Menu
Specifying a Basic Trigger
To assign terms to an analyzer
When you turn the logic analyzer on, Analyzer 1 is named Machine 1
and Analyzer 2 is off. Because trigger terms can only be used by one
analyzer at a time, all the terms are assigned to Analyzer 1. If you plan
to use both analyzers in your measurement, you need to assign some of
the terms to Analyzer 2.
1Go to the Trigger Machine 1 menu.
If you have renamed Machine 1 in the Analyzer Configuration menu,
the name you changed it to will appear in the menu instead of Machine
1.
2Select a term.
The terms are the fields below the roll field "Terms". See the figure
below.
3Select Assign from the list that appears.
The Resource Term Assignment menu appears. It is divided into two
sections, one for each analyzer. All terms are listed.