449
Specifications
General Information
Marker functions
Time interval. The X and O markers measure the time interval
between a point on a timing waveform and the trigger, two points on
the same timing waveform, two points on different waveforms, or two
states (time tagging on).
Delta states (state analyzer only). The X and O markers measure
the number of tagged states between one state and trigger or between
two states.
Patterns. The X and O markers can be used to locate the nth
occurrence of a specified pattern from trigger, or from the beginning of
data. The O marker can also find the nth occurrence of a pattern from
the X marker.
Statistics. X and O marker statistics are calculated for repetitive
acquisitions. Patterns must be specified for both markers, and statistics
are kept only when both patterns can be found in an acquisition.
Statistics are minimum X to O time, maximum X to O time, average X
to O time, and ratio of valid runs to total runs.
Auxiliary power
Power through cables 1/3 amp at 5 V maximum per cable