234
Using the Pattern Generator
ASCII File Commands
ASCII File Commands
In addition to the unique ASCII file commands described here, you may
want to include some standard FORMat commands in the ASCII file,
such as those that are used to specify the clock or output mode.
The only FORMat commands that are permitted are FORMat: MODe,
CLOCk, and DELay. Refer to the command descriptions in this chapter
for the syntax of these commands.
Note that there is no section header prefix for these ASCII file
command strings.
Refer to the example programs at the end of this chapter for usage
examples of the various commands described in this chapter.

ASCDown Command

Command ASCDown
The ASCDown command is used to signal the start of an ASCII file load.
It causes the current pattern generator label and sequence structures
to be cleared and reset to a default state.
The ASCDown command must precede any label definitions and the
data portion of an ASCII file load.
Example ASCDown