476
Introducing the LAN Interface
Introducing the LAN Interface
Introducing the LAN Interface
The Agilent Technologies Logic Analyzer LAN interface lets you
connect your logic analyzer to an Ethernet network that uses TCP/IP.
With the LAN Interface, you can:
•Set up and run measurements using the logic analyzer's XWindow
interface.
•Copy measurement data from the logic analyzer to your computer us ing
File Transfer Protocol program (ftp) or Network File System (NFS).
•Save and restore configurations.
•Program the logic analyzer.

Requirements

In order to use your 1670G logic analyzer on the LAN, you need the
following equipment and software:
•Ethernet local area network using TCP/IP protocol.
•If you are using a PC, NFS program or ftp program.
•If you want to use the logic analyzer's XWindow interface, Xserver
program running on your computer.

Characteristics

Physical Connection.
•RJ-45 connector for direct connection to 10Base-T ("ethertwist") networks
•BNC connector for direct connection to 10Base2 ("thinlan") networks