433
Troubleshooting the Logic Analyzer
Error Messages
"Selected File is Incompatible"
This occurs when you try to load a configuration file for the wrong
module. Ensure that you are loading a translatable configuration file for
your logic analyzer.
"Slow or Missing Clock"
❏This error might occur if the target system is not running properl y. Ensure
that the target system is on and opera ting properly.
❏Check your State clock configuration. The proper clocking scheme should
be listed in your Analysis Probe User’s Guide.
❏If the error message persists, check that the logic analyzer pod s are
connected to the proper connectors. See the User’s Guide for your analysis
probe to determine the proper connections.
"Waiting for Trigger"
If a trigger pattern is specified, this message indicates that the
specified trigger pattern has not occurred. Verify that the triggering
pattern is correctly set.
❏When analyzing microprocessors that fetch only from long-wo rd aligned
addresses, if the trigger condition is set t o look for an opcode fetch at an
address not corresponding to a long-word boundary, the trigger will never
be found.