355
System Performance Analysis (SPA) Software
System Performance Analysis Software
Getting started
This section describes how to access the System Performance Analysis
(SPA) menus. Also, it describes selecting the SPA modes and setting
the specifications.

Accessing the menus

The SPA menus are accessed through the Analyzer Configuration
menu. When the configuration menu is displayed, select the Type field
and choose SPA from the pop-up.
Configuring an Analyzer for SPA

Selecting State Overview, State Histogram, or Time

Interval modes

To access one of the three SPA modes, select the analyzer menu field
after configuring one of the analyzers as SPA and select SPA.
Once in the SPA menu, you can move from State Overview, State
Histogram, or Time Interval Modes by selecting the Trace Mode field as
shown in the SPA menu on the next page. A pop-up menu appears, and
you can select one of the three SPA modes in the pop-up.
NOTE: If you change modes while the logic analyzer is acquiring da ta, it will stop the
acquisition.