347
Logic Analyzer Reference
The Compare Menu
Find Error field
The Find Error field lets you easily locate any patterns that do not
match in the current comparison. Occurrences of differences or errors
are found in numerical ascending order from the start of the listing.
The first occurrence of an error has the numerical value of one.
You select which error number to find by highlighting the Find Error
field and entering a number from the front-panel keypad. If the roll
indicator is in the Find Error field, simply turn the knob. The listing is
then scanned sequentially until the specified occurrence is found and
rolled into view.
Compare Full/Compare Partial field
The Compare Full/Compare Partial field is a toggle field which lets you
compare either the full range of states or define a subset of the total
number of states in the Reference image to be used in the comparison.
The Compare mode is accessed by selecting the Compare Full/
Compare Partial field in either the Compare or Difference listing
menus. When selected, a pop-up appears in which you select either the
Full or Partial option.
When you select the Partial option, fields appear for setting the start
state and stop state values. Only bits in states (lines) on or between the
boundaries are compared against the acquired data.