Agilent Technologies 1670G To inspect the logic analyzer, To apply power

456
Operator’s Service
Preparing For Use
To inspect the logic analyzer
1Inspect the shipping container for damage.
If the shipping container or cushioning material is damaged, keep them
until you have checked the contents of the shipment and checked the
instrument mechanically and electrically.
2Check the supplied accessories.
3Inspect the product for physical damage.
Check the logic analyzer and the supplied accessories for obvious
physical or mechanical defects. If you find any defects, contact your
nearest Agilent Technologies Sales Office. Arrangements for repair or
replacement are made, at Agilent Technologies’ option, without waiting
for a claim settlement.
To apply power
1Check that the line voltage selector, located on the rear panel, is
on the correct setting and the correct fuse is installed.
2Connect the power cord to the instrument and to the power
source.
This instrument is equipped with a three-wire power cable. When
connected to an appropriate ac power outlet, this cable grounds the
instrument cabinet. The type of power cable plug shipped with the
instrument depends on the country of destination.
3Turn on the instrument power switch located on the front panel.