Agilent Technologies 1670G To set up time correlation between a timing and a state analyzer

83
Using the Trigger Menu
Setting Up Time Correlation between Analyzers
To set up time correlation between a timing
and a state analyzer
To set up time correlation between a timing and a state analyzer, only
the state analyzer needs to have Count Time turned on. The timing
analyzer automatically keeps track of time.
1In the state Analyzer Trigger menu, select Count.
Count may be Count Off, Count Time, or Count States. Selecting the
field causes a pop-up to appear.
2Select the field after Count: and select Time.
A warning may appear about reduced memory. It will not prevent you
from changing Count to Count Time.
3Select Done.
Now when you acquire data you will be able to set up a mixed display.