580
Using the Symbol Utility
To generate a symbol file
In order to view symbols from your software in the Listing or Waveform
menus of the logic analyzer, you need to create a symbol file in one of
the formats that are supported by the Symbol Utility. If your language
tools cannot generate an OMF symbol file which is compatible with the
Symbol utility, you may create a symbol file in the General-Purpose
ASCII (GPA) file format.
1Compile, assemble, and link your program using the "generate
symbol file" option of your language tools.
2Transfer the DOS-formatted symbol file to the logic analyzer. You
can put the file on a flexible disk, or use a LAN interface to
transfer the file directly to the hard disk.
NOTE: If you need help creating OMF files, refer to your software tool documentation
for information about how to generate OMF files during compilation and
linking.
See also "The General-Purpose ASCII File Format" on page 609 for a complete
description of the ASCII symbol file format.
"Supported Symbol File Formats," on page 567 for a list of the symbol
file formats that are supported.