217
Using the Pattern Generator
Building Test Vectors and Functions
To use Autoroll
When Autoroll is used, each time you complete the process of adding
data to a data field, the data entry focus changes to the next specified
data field. The data entry keypad remains active, ready to define the
next data field.
The following procedure shows you how to use Autoroll:
1Select the first data field to define.
2Enter the desired data using the pop-up keypad.
3Select the Autoroll Off field, then select the desired roll
direction.
4As you continue to enter data and select Done, the data field
focus rolls to the next data field automatically.