156
Using the Oscilloscope
Oscilloscope Common Menus
Time ba se
The s/Div and Delay fields are displayed on all of the oscilloscope
menus, except for the Calibration menu.

s/Div field

The s/Div field allows you to set the sweep speed (time scale) on the
horizontal axis of the display from 500 ps/div to 5 sec/div. Sweep speed
is measured in seconds per division.

Delay field

The Delay field allows you to set the horizontal position of the
displayed waveform in relation to the trigger. Delay time is always
measured from the trigger point on the waveform to the center of the
screen. Delay time is measured in seconds. When acquisitions are
stopped, the Delay field can be used to control the portion of
acquisition memory displayed on screen.