308
Logic Analyzer Reference
The Analyzer Format Menu
Symbols field
The Symbols field is located directly below the Run field in the upper
right corner of the Format menu. Use this field to access the symbol
tables.
Use symbol tables to define a mnemonic for a specific bit pattern of a
label. You can specify up to 1000 total symbols, and use them freely
between available analyzers. When measurements are made, the
mnemonic is displayed where the bit pattern occurs using the selected
symbol base. You can also download compiled symbol tables using
Agilent Technologies E2450A Symbol Utility, which is supplied with the
logic analyzer.
See Also The Symbol Utility section of this book on page 566 for more
information on downloading symbols.

Label field

The Label field identifies the label for which you are specifying
symbols. When you select this field, a selection menu appears that lists
all the labels turned on for that analyzer. Each label has a separate
symbol table, so you can give the same name to symbols defined under
different labels.
Symbol Pop-up Menu