212
Using the Pattern Generator
Building Test Vectors and Functions
To build a User Symbol Table
You may want to build a symbol table to make inserting values into your
program easier. You can name a symbol for one value in a label and
insert that symbol into your vector sequence where you need it.
1From the Format menu, select the Symbols field at the right of
the menu.
2Set the desired Label, Base, and Symbol Width.
Symbols are specific for a given label. Symbol width determines the
width of the symbolic name displayed in the Sequence menu.
3Select the Symbol field, then enter a name for the symbol.
4Select the desired symbol Type, then enter the Pattern/Start and
Stop values.
The type is either a pattern or a range. A range provides a symbolic
method for defining values within a specified range.
5If you want to add more symbols, select the Symbol field. Then
select Add a Symbol, and repeat steps 2 through 4.
6Select Done.