Agilent Technologies 1670G To make a measurement

Logic Analyzer Overview

Agilent Technologies 1670G-Series Logic Analyzer

To make a measurement

For more detail on any of the information below, see the referenced

chapters or the Logic Analyzer Training Kit. If you are using an analysis

probe with the logic analyzer, some of these steps may not apply.

Map to target

Connect probes from the target system to the logic analyzer to

physically map the target system to the channels in the logic analyzer.

Attach probes to a pod in a way that keeps logically-related channels

together. Remember to ground the pod.

See Also "Probing" on page 248 for more detail on constructing probes.

When the logic analyzer is turned on, Analyzer 1 is named Machine 1

and is configured as a timing analyzer, and Analyzer 2 is off. To use

state analysis or software profiling, you must set the type of the

analyzer in the Analyzer Configuration menu. You can only use one

timing analyzer at a time.