P R E L I M I N A R YAMD
DC CHARACTERISTICS (continued)
3.3 V Am79C930 DC Characteristics
Parameter |
|
|
|
|
|
Symbol | Parameter Description | Test Conditions | Min | Max | Units |
|
|
|
|
|
|
IDDPD2 | Power Supply Current | Power Down mode |
| 5 | mA |
|
| CLKIN = internally cutoff, |
|
|
|
|
| PMX1 = 32.768 kHz, |
|
|
|
|
| no host interface |
|
|
|
|
| accesses occurring |
|
|
|
|
| VIN ≤ VIL or VIN ≥ VOH |
|
|
|
IDDPD3 | Power Supply Current | Power Down mode |
| 900 | μA |
|
| CLKIN = internally cutoff, |
|
|
|
|
| PMX1 = 32.768 kHz, |
|
|
|
|
| no host interface |
|
|
|
|
| accesses occurring |
|
|
|
|
| VIN ≤ VOLC or VIN ≥ VOHC |
|
|
|
|
|
|
|
|
|
CIN | Input Pin Capacitance | FC = 1 MHz (Note 6) |
| 12 | pF |
|
|
|
|
|
|
CO | I/O or Output Pin Capacitance | FC = 1 MHz (Note 6) |
| 12 | pF |
CCLK | BCLK Pin Capacitance | FC = 1 MHz (Note 6) |
| 12 | pF |
Notes:
1.IOL1 = 2.4mA applies to the following pins: STSCHG, PWRDWN, MA[16:0], MD[7:0], FCE, SCE, XCE, MOE, MWE, TDO,
LFPE, LFCLK, LLOCKE, HFPE, INPACK, HFCLK, ANTSLT, ANTSLT, TXCMD, TXCMD, TXPE, TXDATA, TXDATA, TXMOD, RXPE, FDET, SDCLK, SDDATA, SDSEL[3:1], SAR[6:0], USER[4:2], USER[0], TXC, ADIN1, ADIN2.
IOL2 = 12 mA applies to the following pins: ACT, LNK
IOL3 = 8 mA applies to the following pins: D[7:0], WAIT, IREQ, USER5, USER6, RXC, USER7, USER[1]
2.VOH does not apply to
3.Does not apply to PMX1, PMX2, and ADREF.
4.IOZH and IOZL apply to all
5.Outputs are CMOS and will be driven to rail if the load is not resistive to supply.
6.Not 100% tested. Value determined by characterization.
Am79C930 | 129 |