System Interface Unit (SIU)
MPC8260 PowerQUICC II Family Reference Manual, Rev. 2
Freescale Semiconductor 4-43
4.3.2.13 Local Bus Transfer Error Status and Control Register 2 (L_TESCR2)

The local bus transfer error status and control register 2 (L_TESCR2) is shown in Figure4-34.

Table4-18 describes L_TESCR2 fields.

17 DMD Data errors disable. Setting this bit disables parity errors on the local bus.
18–19 — Reserved, should be cleared.
20 — .29µm (HiP3) Rev A.1 silicon: reserved, should be cleared.
DER .29µm (HiP3) Rev B.3 silicon and forward: Data error. Set when a core machine check is asserted
due to parity errors in the local bus.
21–31 — Reserved, should be cleared.
011 12 15
Field — PB
Reset 0000_0000_0000_0000
R/W R/W
Addr 0x0x1004C
16 27 28 31
Field BNK —
Reset 0000_0000_0000_0000
R/W R/W
Addr 0x1004E
Note: all bits are status bits and are cleared by writing 1s.

Figure 4-34. Local Bus Transfer Error Status and Control Register 2 (L_TESCR2)

Table4-18. L_TESCR2 Field Descriptions

Bits Name Description
0–11 — Reserved, should be cleared.
12–15 PB Parity error on byte. There are four parity error status bits, one per 8-bit lane. A bit is set for the byte
that had a parity error.
16–27 BNK Memory controller bank. There are twelve error status bits, one per memory controller bank. A bit is
set for the local bus memory controller bank that had an error. Note that BNK is invalid if the error
was not caused by ECC or PARITY checks.
28–31 — Reserved, should be cleared.

Table4-17. L_TESCR1 Field Descriptions (continued)

Bits Name Description