PCI Bridge
MPC8260 PowerQUICC II Family Reference Manual, Rev. 2
9-42 Freescale Semiconductor
9.11.1.15 PCI Inbound Translation Address Registers (PITAR
x
)

The PCI inbound translation address registers (PITARx), shown in Figure9-29, select the base addresses

in the 60x address space of the translation windows for transactions generated by the master on the PCI

bus. The new translated address is created by concatenating the transaction offset to this base address.

Refer to Section 9.10.2.1, “PCI Inbound Translation.”

Figure 9-29. PCI Inbound Translation Address Registers (PITAR

x
)

Table9-16. describes PITARx.

9.11.1.16 PCI Inbound Base Address Registers (PIBAR
x
)

The PCI inbound base address registers (PIBARx), shown in Figure 9-30, select the starting addresses (in

PCI memory space) of the windows to be translated. These registers are tied to the GPLABARx registers;

see Section 9.11.2.14, “General Purpose Local Access Base Address Registers (GPLABARx).” A change

1 Parity bit Parity bit for PCI bus data word.
0 Valid info When this bit is set, the PCI bus error capture registers (PCI_EACR, PCI_EDCR,
and PCI_ECCR) contain valid information.
Writing ‘0’ to this bit enables the capture of a new error in the PCI bus error
capture registers (PCI_EACR, PCI_EDCR, and PCI_ECCR).
31 20 19 16
Field — TA
Reset 0000_0000_0000_0000
R/W R/W
Addr 0x108EC (PITAR0); 0x108D2 (PITAR1)
15 0
Field TA
Reset 0000_0000_0000_0000
R/W R/W
Addr 0x108EA (PITAR0); 0x108D0 (PITAR1)

Table 9-1 6. PI TAR

x

Field Descriptions

Bits Name Description
31–20 — Reserved, should be cleared.
19–0 Translation Address 60x address which indicates the starting point of the inbound translated address.
The translation address must be aligned based on the window’s size. This
corresponds to bits 31-12 of a 32-bit address

Table9-15. PCI_ECCR Field Descriptions (continued)

Bits Name Description