External Signals
MPC8260 PowerQUICC II Family Reference Manual, Rev. 2
6-10 Freescale Semiconductor
LSDWE
LGPL1
PCI_MODCK_H11
Local bus SDRAM write enable—Output from the local bus SDRAM controller. Should be
connected to the WE inputs of the SDRAMs.
Local bus UPM general purpose line 1—This is one of six general purpose output lines from
UPM. The values and timing of this pin is programmed in the UPM.
PCI MODCK_H1—In PCI mode, defines the operating mode of internal clock circuits.
LOE
LSDRAS
LGPL2
PCI_MODCK_H21
Local bus output enable—The output enable pin is an output of the Local bus GPCM. Controls
the output buffer of memory devices during read operations.
Local bus SDRAM RAS—Output from the Local bus SDRAM controller. Should be connected to
the SDRAM RAS input.
Local bus UPM general purpose line 2—This is one of six general purpose output lines from
UPM. The values and timing of this pin is programmed in the UPM.
PCI MODCK_H2—In PCI mode, defines the operating mode of internal clock circuits.
LSDCAS
LGPL3
PCI_MODCK_H31
Local bus SDRAM CAS—Output from the Local bus SDRAM controller. Should be connected to
the CAS inputs of the SDRAMs.
Local bus UPM general purpose line 3—This is one of six general purpose output lines from
UPM. The values and timing of this pin is programmed in the UPM.
PCI MODCK_H3—In PCI mode, defines the operating mode of internal clock circuits.
LGTA
LUPMWAIT
LGPL4
LPBS
Local bus GPCM TA—This input pin is used for transaction termination during GPCM operation.
Requires external pull up resistor for proper operation.
Local bus UPM wait—This is an input to the UPM. An external device may hold this pin high to
force the UPM to wait until the device is ready for the continuation of the operation.
Local bus UPM general purpose line 4—One of six general purpose output lines from UPM. The
values and timing of this pin is programmed in the UPM.
Local bus parity byte select—In systems in which the data parity is stored in a separate chip, this
output is used as the byte select for that chip.
LGPL5
PCI_MODCK1
Local bus UPM general purpose line 5—This is one of six general purpose output lines from
UPM. The values and timing of this pin is programmed in the UPM.
PCI MODCK—In PCI mode, defines additional operating modes of internal clock circuits.
LWR Local write—The local write pin is an output from the local bus memory controller. It is used to
distinguish between read and write transactions.
L_A14
PCI_PAR1
Local bus address 14—Local bus address bit 14 output pin. In the local address bus bit 14 is most
significant and bit 31 is least significant.
PCI parity—PCI parity input/output pin. Assertion of this pin indicates that odd parity is driven
across PCI_AD[31-0] and PCI_C/BE[3–0] during address and data phases. Negation of
PCI_PAR indicates that even parity is driven across the PCI_AD[31-0] and PCI_C/BE[3–0] during
address and data phases.
Table6-1. External Signals (continued)
Signal Description