GE user manual GFK-2489 Remote Radio Management

4

7:7 milliseconds

14:14 milliseconds

28:28 milliseconds

MODE=<mode>—Sets operation to Direct or Infrastructure mode.

ON: Enter Direct mode

OFF: Enter Infrastructure mode

EXT: Enter Direct mode by external control

NETADDR=<netaddr> —Sets or displays the network (system) address (0-30000) when in direct mode.

PWR=<range integer>—In ROOT mode, this command sets the radio power setting in dBm (the range depends on the radio model).

REPEAT=<range integer>—In ROOT mode, this command sets the

Broad-base Repeat Count.

0:Min=0

15:Max=15

RETRY=<range integer>—In ROOT mode, this command sets the

Maximum Unicast Retry Count.

0:Min=0

15:Max=15

SKIPZONES=<bitmap>—In ROOT mode, this command sets the Skip zones Binary Map (HEX: preceded by 0x).

bit0:ZONE1	; 1=Skipped 0=Active
bit1:ZONE2	; 1=Skipped 0=Active
bit2:ZONE3	; 1=Skipped 0=Active
bit3:ZONE4	; 1=Skipped 0=Active
bit4:ZONE5	; 1=Skipped 0=Active
bit5:ZONE6	; 1=Skipped 0=Active
bit6:ZONE7	; 1=Skipped 0=Active
bit7:ZONE8	; 1=Skipped 0=Active

STATE=—(read only) Displays the current Direct mode status.

Currently operating in Infrastructure mode

Currently operating in Direct mode

TYPE= —Sets or displays the role of this radio in Direct mode.

NODE: Operates as one of the Node Remotes

GFK-2489 Chapter 4 Remote Radio Management 4-11