GE GFK-2489 user manual Mixed-Mode Application Example, Operation and Data Flow

5

Mixed-Mode Application Example

In this configuration, the Host PC can use both TCP and serial-to-serial data paths to reach the endpoint devices. This may be helpful when a mixed collection of endpoint devices is present, where some endpoint devices operate via Ethernet while others are polled via a serial port..

Operation and Data Flow

▪Communicate with endpoint devices A and B by sending and receiving data from the AP COM2 port.

▪Communicate with endpoint devices C and D by Telneting to the IP address of each endpoint device.

TS Wireless	Menu Item	Setting
radio Location
AP (COM2)	Port Status	Enabled
	Mode	Serial-to-Serial
	Remote UnitID	Broadcast
	Remote COM Port	COM2
	Baud Rate	19200
	Byte Format	8N1
	Buffer size	256 Bytes
	Inter-Packet Delay	4 Characters
Remote radios 1 and 2	Mode	Data
(COM2)	Baud Rate	19200
	Data Format	8N1
	Buffer Size	256
	DelayChars	4
Remote radios 3 and 4	Mode	On
(ETH)

GFK-2489 Chapter 5 Sample Configurations 5-19