GE GFK-2489 user manual

4

256: 256 samples every 15616 hops

RSSIAVGTHRESH=<RSSI -dBm>—The hand-off threshold for RSSI averaging (–120 dBm to –50 dBm).

HELP Lists commands supported for the current user log-in level.

LOG Sets or displays the event log information, and displays the number of entries in the event log. Optional arguments are used to clear or display the log.

Optional arguments:

CLEAR—Clear the event log

SHOW—Show the event log

TOTAL= —Number of event log entries in log. Read only.

CMD—Displays all settable optional arguments and their current values.

You can copy this list to a text file as a record of your configuration.

LOGIN This command is used for secure log-in to the radio. At the prompt, enter the case-sensitive username and password. Each of these entries can be up to eight characters long.

LOGOUT Logs the user out of the command interface.

MESSAGE Sets or displays the default packet priority.

Optional arguments:

LOW—Default priority setting is low.

NORMAL—Default priority setting is normal.

HIGH—Default priority setting is high.

CMD—Displays all settable optional arguments and their current values.

You can copy this list to a text file as a record of your configuration.

PASSWORD Sets the log-in password for the user at current access level or below.

Optional arguments:

<username>—The log-in username to be associated with the password.

PROGRAM VERIFY Performs a checksum verification of one of the parameters listed below.

Do not enter PROGRAM alone, without the VERIFY= qualifier, unless instructed by technical support personnel. Such an entry causes the radio to enter the Bootloader mode, which, if improperly used, causes an undesired state in the radio.

4-14 TranSphere TS Wireless Extended Range IP Networking Transceivers – January 2008 GFK-2489