3

Remote Management Submenu

The Remote Management Menu allows selection of a particular Remote to manage, based on the radio Unit ID number (generally the last four digits of its serial number).

Remote Management Menu

A) Remote to Manage

0

B)Manage Selected Remote

C)Broadcase Remote Reprogramming

Select a letter to configure an item, <ESC> for the prev menu

Remote to Manage—Radio address of the Remote to be managed (typically a four-digit code).

Manage Selected Remote—Displays the screen shown next. It contains several parameters that are used to set the characteristics of Remote radios in the network.

Broadcast Remote Programming—Selecting this item brings up a submenu where you may initiate the broadcast of new firmware images and Remote restart commands.

Before programming a Remote radio over the air, be sure to set ETHERNET BRIDGING (see “Bridge Configuration Menu”) from ALL (default) to either DISABLED or NO BROADAST/MULTICAST. Otherwise, you may experience sync errors, or programming may not complete. Excessive broadcast/multicast traffic from a connected LAN can also cause problems.

GFK-2489

Chapter 3 AP Management

3-37

Page 70
Image 70
GE GFK-2489 user manual Remote Management Submenu