Feature Summary The TranSphere TS Wireless design makes installation and configuration an easy task, while allowing for configuration changes in the future.
▪Long-range transmission over favorable, unobstructed terrain, with sufficient antenna heights
▪Low power consumption—Sleep and Shutdown modes to enable solar-powered operation
▪Repeater configurations—A repeater scheme can be established to extend the transmission range or to work around obstructions in a network. This is accomplished by connecting two radios back to back at a single site.
▪Industrial-grade product—Extended temperature range for trouble-free operation in extreme environments
▪Robust radio communications—Designed to perform in high-interference environments
▪Security Suite—Blocks common attack schemes and prevents “rogue” hardware from gaining access to or control of a network. Common attack events are logged and reported via alarms.
▪Fast, 106 kbps data speed—Ten times faster than 9.6 kbps radios
▪Simple setup—Ethernet bridge configuration option requires minimal setup
▪Serial ports—Gateway for serial interface equipment to IP or Ethernet networks with an embedded terminal server
Model Offerings
The TranSphere TS Wireless system includes two primary radio types— APs and Remotes. The table below summarizes the interface capabilities for each TS Wireless radio type. Note that a remote serves only one endpoint MAC address, even if a bridge or hub is used.
Model | LAN/ETH | COM1* | COM2 |
AP | LAN | Yes | Yes |
Remote ETH Yes Yes
*This connector provides access to the radio menu system.
1-4 TranSphere TS Wireless Extended Range IP Networking Transceivers – January 2008 GFK-2489
