4

Minimum Configuration for Remotes

Remote radios require little configuration to operate, as most of the configuration is conducted at the AP. The minimum set of parameters that needs to be set for a Remote are:

RADIO UNIT—32-bit radio address. Defaults to the radio serial number, but is settable.

RADIO NETADDR—Radio network address. Must match the AP address.

RADIO PWR —RF output power setting in decibels (dB). The range is 20-30 for non- ETSI 900 MHz radios, 20-27 for non-ETSI 2400 MHz radios, and 10-20 for ETSI 2400 MHz radios.

GFK-2489 Chapter 4 Remote Radio Management 4-3

Page 97
Image 97
GE GFK-2489 user manual Minimum Configuration for Remotes