
3 |
PC Connection and Log-In Procedures
The following steps explain how to access the radio menu. These steps require a PC to be connected to the COM 1 or LAN port on the radio, as shown below.
Starting a Local Console Session (recommended for
1.Connect a serial communications cable between the PC and the COM 1 port on the radio. If necessary, a cable may be constructed as shown below. Maximum recommended cable length is 50ft / 15m).
2.Launch a terminal emulation program such as HyperTerminal. The HyperTerminal program can be accessed on most PCs by selecting Start > Programs > Accessories > Communications > HyperTerminal.
3.Configure the connection with the following settings:
▪19200 bps
▪8 bits • no parity
▪one stop bit (8N1)
▪hardware flow control disabled
▪VT100 emulation
The exact parameters given above must be used for console terminal communication. Improper settings are a common cause of difficulty.
| Chapter 3 AP Management |