Basic Device Information
Starting Information Screen
Upon successful log-in to the menu system, the Starting Information Screen appears. This screen provides a read-only overview of the current operating conditions on the transceiver. (Some items can be changed using the Device Information Screen described later in this section.)
Starting Information Screen
Device Name | |
IP Address | 169.254.0.2 |
Device Status | Operational |
Associated Remotes | 1 |
Location | |
Serial Number | 1205683 |
Uptime | 2 days, 01 hours |
Current Firmware | 2.3.1 |
Current User | admin |
Press ‘G’ to go to Main Menu
▪Device Name—This is a user-defined name for the radio that appears on every screen (40 characters maximum).
▪IP Address—Shows the radio Internet Protocol (IP) address.
▪Device Status—Shows the transceiver condition:
Operational—The radio is operating normally
Alarmed—An alarm event has been logged and not cleared.
If an alarm is present when this screen is displayed, an “A” appears to the left of the Device Status field. (The PWR LED also flashes.) Typing “A” on your keyboard takes you directly to the Current Alarms Screen.
▪Associated Remotes— Shows current number of Remote radios associated with the AP.
▪Location—User-definable string that can be used to identify the radio location (40 characters maximum).
▪Serial Number—Unique identifier for this device. It must be provided when purchasing Authorization Keys to upgrade radio capabilities.
▪Uptime—Elapsed time since the transceiver was powered up.
▪Current Firmware—Version of firmware that is currently active in the radio.
▪Current User—Privilege level at which the user has logged in.
GFK-2489 | Chapter 3 AP Management | 3-11 |
