GE GFK-2489 user manual Set Key AP Parameters, Etsi

2

Set Key AP Parameters

The table below lists key AP operating parameters, their default settings, and their values or range. Typically, these are the only settings that need to be set or reviewed for a basic check of the radio system. A complete list of AP commands appears in chapter 3, AP Management.

Menu Item	Management System	Default	Values or Range
	Location
IP Address	Main Menu >> Network	192.168.1.1	Contact your Network
	Configuration > IP		Administrator.
	Configuration		If IP Address Mode
			(below) is set to Dynamic,
			IP Address is configured
			automatically.
IP Address	Main Menu >> Network	Static	Static Dynamic
Mode	Configuration > IP
	Configuration
IP Netmask	Main Menu >> Network	255.255.0.0	Settable per customer
	Configuration > IP	requirements
	Configuration
Net Address	Main Menu >> Network	9999	1-15 alphanumeric
	Configuration > Wireless		characters*
	MAC Configuration
Menu Item	Management System	Values or Range
	Loca- Default
	tion
RF Output	Main Menu >> Radio	900 MHz: 30 dBm	900 MHz: 20–30 dBm
Power (non-	Configuration > 2.4 GHz:	2.4 GHz: 17-27 dBm
	27 dBm
ETSI)
RF Output	Main Menu >>	2.4 GHz: 20 dBm	2.4 GHz: 10-20 dBm
Power (ETSI)	Radio Configuration >
Password	Main Menu >>	Administrator Password:	1–8 alphanumeric
Changes	Security Configuration >	admin (lower case)	characters Passwords are
			case sensitive; can be
	User Passwords	Guest Password:
			mixed case
		guest (lower case)

*We recommend setting Net Address to the last four digits of the AP serial number to reduce the chance of conflict with other nearby TS Wireless systems.

2-8 TranSphere TS Wireless Extended Range IP Networking Transceivers – January 2008 GFK-2489