HP 441877-00B manual Team properties

6.A message box appears with a warning that the protocol information for the primary adapter, such as the IP address must be configured properly. Click OK to exit this message box.

7.Restart the HP NCU and verify the adapter protocols were configured properly. Select the adapter and click Properties.

Uninstalling teamed adapters

If you need to completely uninstall a teamed adapter (not simply replace it), perform these steps to ensure proper operations:

1.Select the Team and click Dissolve.

2.Click OK on the NCU Main window to accept the changes.

3.Physically remove the adapter from the server.

Configuring HP adapters

The Properties dialog for the HP Network Team Local Area Connection contains the following tabs and buttons.

General Tab

•Connect using—HP Network Team. Components that are selected are used by this connection. These include:

o Client for Microsoft® Networks o HP Network Configuration Utility o Network Load Balancing

o File and Printer Sharing for Microsoft® Networks o Network Monitor Driver

o Net BEUI Protocol

o Internet Protocol (TCP/IP)

NOTE: Other protocols may apply.

•Description—Describes the selected component

•Show icon in taskbar when connected—Enables/Disables the HP connection tray icon

Buttons

•Configure—Displays Windows® 2000 device properties o General (Troubleshooter)—Disable Device option

o Driver (Name, Version number, Driver Details; Install/Uninstall/Update driver buttons)

•Install—Installs the selected protocol

•Uninstall—Uninstalls the selected protocol

•Properties—Accesses dialogs on the protocol for the selected device.

Sharing Tab

Sharing allows other servers or your local network to access external resources through this connection. The options on the Sharing tab are:

Team properties 134