oDefault Settings Enabled Tests:

A1. Indirect Register Test

A2. Control Register Test

A3. Interrupt Test

A4. Built In Self Test

A5. PCI Cfg Register Test

B1. Scratch Pad Test

B2. BD SRAM Test

B3. DMA SRAM Test

B4. MBUF SRAM Test

B5. MBUF SRAM via DMA Test

C1. NVRAM Test

C2. CPU Test

C3. DMA Test

C4. MII Test

C5. VPD Test

C6. ASF Test

C7. Expansion ROM Test

D1. Mac Loopback Test

D2. Phy Loopback Test

D4. MII Miscellaneous Test (Copper only) Disabled Tests:

B6. External SRAM Test

D3. External Loopback Test

•-I <num>

oUse this option to specify the number (iteration) of times the tests are to be run. The default is to run one time. A number zero indicates loop forever. A control-C or control-break key can be used to break the loop. Any error detected will also stop testing after reporting the error.

oExample: q57diag.exe -I 5 Runs tests five times

•-ver

oDisplays the version of the current test software/eeprom.bin

oIf this option is entered, it displays the software version number/silkscreen revision and then exits the program.

oExample: q57diag.exe -ver

•-bus <num>

oTests UUT location

oIf this option is specified, the program will test all UUTs on the specified bus number. This option is ignored if -c option is entered.

Diagnostics 162