odflt = 1

•-rstpl <x> <y>

o<x> = post GRC rst poll interval, dly in ms; dflt = 10

o <y> = post GRC rst poll count; dflt = 0 (disable)

•-rstpld

Above post reset polling counts display enable.

•-addref (x)

Added a ref card info of dev <x> to refinfo.txt

•-blink <x>

Blinks the LED on the selected device

•-rf <x>

Selects a reference device for test D3

•-sil

Used before the -firm and -firmall options to hide warnings

•-exe

Executes diags commands without a device present

•-updateasfcfg

Used with the -firmall option to include updating ASF CFG block

•-updateumpcfg

Used with the -firmall option to include updating UMP CFG block

•-pump <file>

Option to program UMP firmware

•-updatesecfg

Used with the -firmall option to include updating SE CFG block

•-mfct <file>

Programs a new SSID and SVID based on <file>

•-fail2

On failure offsets failed message printout

•-logfl

Log file buffer flush per line

•-nosz

Do not write the NVRAM with the TPM/NVRAM size

Error codes and messages

1.Got 0x%08x @ 0x%08x. Expected 0x%08x

2.Cannot run test while chip is running

3.Invalid adapter device

4.Read only bit %s got changed after writing zero at offset 0x%X

Diagnostics 165