Diagnostics | HP 441877-00B specs

oExample: q57diag.exe -bus 5 Program tests UUTs on bus 5

•-dpmi

oSpecifies the use of DPMI memory allocation

oUses DPMI memory allocation method to allocate memory instead of malloc() or free().

•-dir

oDisplays the version of the IPMI (Intelligent Platform Management Interface)

•-errctrl <c>

Specifies action on error -> a:abort, w:wait, l:loop, c:continue, s:skip

•-com <value>

Enables com port value (1..4)

•-ems <size>

Specifies external memory size in HEX to tst

•-ref

Runs test with reference device

•-findref

Detects reference device

•-fmac

Enables input of Mac address from a file

•-lbm <n>

Sets Mac loopback packets

•-lbp <n>

Sets Phy loopback packets

•-lbe <n:n:n>

oSets external loopback packets

oFormat: <1000Mbps:100Mbps:10Mbps>

•-mba <value>

oEnables/disables MBA

oValue = 0 to disable; Value = 1 to enable

•-mbap <value>

oSelects MBA protocol

oValue = 0 for PXE; Value = 1 for RPL; Value = 2 for BootP

•-mbas <value>

oSelects MBA speed

oValue = 0 for auto; Value = 1 for 10HD; Value = 2 for 10FD; Value = 3 for 100HD; Value = 4 for 100FD; Value = 6 for 1000FD (fiber)

•-firm <file>

Updates device eeprom based on <file> image match

HP 441877-00B manual Diagnostics