100 Mbps full-duplex

1000 Mbps full-duplex

oFlow Control

Disabled (default)

Auto Negotiation (Symmetric Pause advertised) Receive Pause

Transmit Pause

Receive & Transmit Pause

oMAC Address

No Override (default) - a user-administered MAC address entered with a colon separating each hexadecimal byte (for example, 12:34:56:78:9a:bc).

oJumbo MTU Size

1500–9000 (default is 1500)

For more detailed information, at the command prompt, enter: man bcme

NOTE: 1000 Mbps (1 Gbps) full-duplex fixed speed is only valid for fiber connections. For copper, twisted-pair connections, 1 Gbps can only be set through auto-negotiation with a 1 Gbps partner.

NOTE: Auto-negotiation of Flow Control is only valid when the Line Speed is set to

AutoNegotiate.

Solaris

The following describes the Solaris driver for HP 10/100/1000 Mbps Network Server Adapters. The driver is released in two formats:

•BRCMbcme.pkg: Datastream format

•bcmedu.img: Driver Update (DU) binary image which is used to create DU diskette.

Installing the driver

1.Change directory to where BRCMbcme.pkg resides.

2.pkgadd -d BRCMbcme.pkg

3.Execute prtconf to determine instance number of the adapter.

4.ifconfig bcme [instance_number] plumb

5.ifconfig bcme [instance_number] ip_address netmask ....

To make these changes permanent:

1.Use your favorite text editor (for example, VI), and create a file named

hostname.bcme[instance_number] in /etc directory. Add the IP address of the interface to this file, save and exit.

2.Add a proper subnet mask to the file /etc/netmasks.

Installation 23