you do not include "TEAM=1" CPQANS defaults to Team 1. Thus, the "TEAM" command line switch is optional for the first Team.
LOAD CPQANS FRAME=ETHERNET_802.2 NAME=GIG_FT_E82 TEAM=1 MODE=NFT LOAD CPQANS FRAME=ETHERNET_II NAME=GIG_FT_EII TEAM=1
3.Load the base drivers for the first Team.
LOAD N1000 SLOT=1 FRAME=ETHERNET_802.2 NAME=GIG_E82 LOAD N1000 SLOT=1 FRAME=ETHERNET_II NAME=GIG_EII LOAD N100 SLOT=2 FRAME=ETHERNET_802.2 NAME=100_E82 LOAD N100 SLOT=2 FRAME=ETHERNET_II NAME=100_EII
4.Bind CPQANS to the base driver for each adapter and each frame type. Bind to the name of the base driver instance (assigned when the driver was loaded) and specify the Team ID number.
BIND CPQANS GIG_E82 TEAM=1
BIND CPQANS GIG_EII TEAM=1 BIND CPQANS 100_E82 TEAM=1 BIND CPQANS 100_EII TEAM=1
5.Finalize the Team with the "COMMIT" command.
LOAD CPQANS COMMIT TEAM=1
6.Bind IPX to 802.2 and bind IP to Ethernet II.
BIND IPX GIG_FT_E82 NET=102
BIND IP GIG_FT_EII ADDR=128.181.11.1 MASK=255.255.255.0
7.Load CPQANS with the second team. Name each frame type with the "NAME" keyword and specify the second Team with the "TEAM=2" keyword. You can also specify the Team "MODE" FEC.
LOAD CPQANS FRAME=ETHERNET_802.2 NAME=FEC_TEAM_E82 TEAM=2 MODE=FEC LOAD CPQANS FRAME=ETHERNET_II NAME=FEC_TEAM_EII TEAM=2
8.Load the base drivers for the second Team.
LOAD N100 SLOT=6 FRAME=ETHERNET_802.2 NAME=FEC_1_E82 LOAD N100 SLOT=6 FRAME=ETHERNET_II NAME=FEC_1_EII LOAD N100 SLOT=5 FRAME=ETHERNET_802.2 NAME=FEC_2_E82 LOAD N100 SLOT=5 FRAME=ETHERNET_II NAME=FEC_2_EII LOAD N100 SLOT=4 FRAME=ETHERNET_802.2 NAME=FEC_3_E82 LOAD N100 SLOT=4 FRAME=ETHERNET_II NAME=FEC_3_EII LOAD N100 SLOT=3 FRAME=ETHERNET_802.2 NAME=FEC_4_E82 LOAD N100 SLOT=3 FRAME=ETHERNET_II NAME=FEC_4_EII
9.Bind CPQANS to the base driver for each adapter and each frame type. Bind to the name of the base driver instance (assigned when the driver was loaded) and specify the Team number.
BIND CPQANS FEC_1_E82 TEAM=2 BIND CPQANS FEC_1_EII TEAM=2 BIND CPQANS FEC_2_E82 TEAM=2 BIND CPQANS FEC_2_EII TEAM=2 BIND CPQANS FEC_3_E82 TEAM=2 BIND CPQANS FEC_3_EII TEAM=2 BIND CPQANS FEC_4_E82 TEAM=2 BIND CPQANS FEC_4_EII TEAM=2
10.Finalize the Team with the "COMMIT" command.
LOAD CPQANS COMMIT TEAM=2
11.Bind IPX to 802.2 and bind IP to Ethernet II.
BIND IPX FEC_TEAM_E82 NET=202
BIND IP FEC_TEAM_EII ADDR=128.181.22.1 MASK=255.255.255.0
Example 4: One NC series server adapter and two VLANs
NOTE: VLAN is not supported on heterogeneous teaming.
Team properties 146