•Offload Receive TCP Checksum. Offloads the task of computing the checksum for incoming TCP or UDP packets, thereby improving performance.

o Default = On

o Range = Off; On

•Offload Transmit TCP Checksum. Offloads the task of computing the checksum for outgoing TCP or UDP packets, thereby improving performance.

o Default = On

o Range = Off; On

•Offload Transmit IP Checksum. This property does not apply to the NC6132, NC6133 or NC6134 adapters. Offloads the task of computing the checksum for outgoing IP packets, thereby improving performance.

o Default = On

o Range = Off; On

•Offload Receive IP Checksum. (NC110x, NC310F, NC340x, NC360x, NC364x, NC6170, and NC7170 only). Offloads the task of computing the checksum for incoming IP packets, thereby improving performance.

o Default = On (NC110, NC360x, NC364x = Off) o Range = Off; On

•Enable PME (NC110x, NC310F, NC340x, NC360x, NC364x, NC6170, and NC7170 only). Allows the use of power management and wake-up functions.

o Default = No Action (NC110x, NC360x, NC364x = OS Controlled)

o Range = Disabled; Enabled; Hardware Default; No Action (NC110x, NC360x, NC364x = OS Controlled, Disabled, Enabled)

•Wake On Settings (NC110x, NC310F, NC340x, NC360x, NC364x, NC6170, and NC7170 only). Available only when Enable PME is enabled. Allows you to choose what types of packets will cause the adapter to wake.

o Default = Disabled (NC110x, NC360x, NC364x = OS Controlled)

o Range = Disabled; Wake on Directed Packet; Wake on Magic & Directed; Wake on Magic Packet; OS Controlled

•Large Send Offload (Windows® Server 2003 only; NC110x, NC310F, NC340T, NC360x, NC364x, NC6170, and NC7170 only). Enables offloading of large TCP packets.

o Default = On

o Range = Off; On

•Smart Power Down. (NC110T, NC360x, and NC364T only) Minimizes power consumption by enabling the adapter to enter a deep sleep mode under certain conditions.

o Default = Hardware Default

o Range = Disable, Enable, Hardware Default

•Wake on Link. (NC110T, NC360x, and NC364T only) Allows wake-up from Advanced Configuration and Power Interface (ACPI) when link is reconnected.

o Default = Disable

o Range = Disable, Force

Adapter configurations 105