This soft copy for use by IBM employees only.
5.The ATM LAN Bridge Module Configuration Utility will be automatically added to the program manager.
6.The setup program will notify you when the installation is complete.
1.3TCP/IP SLIP Connection Setup
In order to communicate with the ATM LAN Bridge Module hardware, the Configuration Utility uses TCP/IP via the winsock.dll. The configurator has been thoroughly tested with the IBM versions of TCP/IP (DOS and OS/2). However it has been demonstrated to work with the Chameleon TCP/IP protocol stack from NetManage
and Win95 from Microsoft.
*************************************************************************
*** You will need a NULL modem cable to directly attach to the bridge ***
*** using the SLIP interface.***
*************************************************************************
End to end the cable needs the following lines:
25 pin |
|
|
|
|
| |
====== |
| ======== ( 25 | pin female | |||
PC | · | 8281 | cable connector) | |||
====== |
| ======== |
|
| ||
|
| |||||
Pin Number | Line |
| Line | Pin Number | ||
3 |
| RD | TD |
| 2 | |
2 |
| TD | RD |
| 3 | |
7 | COMMON | COMMON | 7 | |||
9 PIN |
|
|
|
|
|
|
====== |
| ======== ( 25 | pin female | |||
PC | · | 8281 | cable connector) | |||
====== |
| ======== |
|
| ||
|
| |||||
Pin Number | Line |
| Line | Pin Number | ||
2 |
| RD | TD |
| 2 | |
3 |
| TD | RD |
| 3 | |
7 | COMMON | COMMON | 7 | |||
NULL MODEM CABLES
NOTICE: The Transmit and Receive line #′ s are reversed on the 9 and 25 connectors (on the PC side).
******************************************************************
**** IMPORTANT NOTE REGARDING - UART TYPE****
******************************************************************
>>>NOTE: It is HIGHLY recommended that you use a workstation that has a Type 2 UART to ensure reliable transfer of data between the workstation and the ATM LAN Bridge Module.
If you are not sure what type of UART your machine has
SLIP will display the UART type on bringup. When SLIP
