
This soft copy for use by IBM employees only.
Table 30. Download Errors and Suggested Fixes
Symptom | Possible Cause | Suggested Actions | |
|
|
|
|
Ping failure | TFTP server | • | Check if server is |
| |||
| unreachable via a |
| on. |
| TCP/IP connection. | • | Check if server has |
|
| ||
|
|
| |
|
|
| TCP/IP running. |
|
| • | Validate all cable |
|
|
| |
|
|
| connections |
|
|
| (continuity, polarity, |
|
|
| etc.) |
|
| • | Make sure ports are |
|
|
| |
|
|
| properly enabled. |
|
| • | Check if ARP server |
|
|
| |
|
|
| has registered 8285. |
|
|
| See section **** for |
|
|
| how to do this. |
|
| • | Check IP subnetting |
|
|
| |
|
|
| to ensure both |
|
|
| devices are in the |
|
|
| same subnet. |
|
|
| |
Download failure | TFTP not enabled on the | Enable TFTP on server | |
| server. | and/or start TFTP | |
|
| daemon. | |
|
|
|
|
| R/W permissions | • | Login to the TFTP |
|
| ||
| improperly set on a |
| server |
| UNIX server. | • | Change to the |
|
| ||
|
|
| |
|
|
| directory the |
|
|
| upgrade files reside |
|
|
| in |
|
| • | Change the file |
|
|
| |
|
|
| permissions using |
|
|
| the CHMOD a+r |
|
|
| <filename> |
|
|
| command |
|
|
| |
| Corrupted upgrade files. | Download the files | |
|
| again, making sure that | |
|
| you are downloading | |
|
| them as binary files. | |
|
|
|
|
5.To activate the new microcode, it is necessary to swap the operational
microcode with the backup microcode, using the SWAP MICROCODE command and the SWAP FPGA_PICOCODE command. Don′t forget to SAVE
ALL first as the SWAP will reset the subsystem and any unsaved changes will be lost.
Reminder
This must be performed with No operational traffic flowing in through the 8285. Normally this operation would be done during a scheduled maintenance period.
Chapter 6. IBM 8285 Planning and Installing 119