This soft copy for use by IBM employees only.
•All the commands can be abnormally terminated by pressing the Ctrl and C keys simultaneously.
The following table is a quick reference to the procedures required to configure the ATM subsystem of the 8285. Some of them are mandatory; others are recommended.
Table 37. 8285 Configurations SET Commands Quick Reference List
Procedure | 8285 Commands |
|
|
Configure user and administrator passwords | SET DEVICE PASSWORD |
|
|
Configure 8285 terminal settings | SET TERMINAL BAUD |
| SET TERMINAL DATA_BITS |
| SET TERMINAL PARITY |
| SET TERMINAL STOP_BITS |
| SET TERMINAL PROMPT |
| SET TERMINAL TIME_OUT |
| SET TERMINAL HANGUP |
| SET TERMINAL CONSOLE_PORT_PROTOCOL |
|
|
Configure 8285 device configuration | SET CLOCK |
| SET DEVICE NAME |
| SET DEVICE LOCATION |
| SET DEVICE CONTACT |
| SET DEVICE DIAGNOSTICS |
|
|
Configure 8285 ATM address | SET DEVICE ATM_ADDRESS |
|
|
Configure Classical IP parameters for 8285 | SET DEVICE IP_ADDRESS |
| SET DEVICE DEFAULT_GATEWAY |
| SET DEVICE ARP_SERVER |
|
|
Configure LEC IP parameters for 8285 | SET DEVICE LAN_EMULATION_CLIENT |
|
|
Configure SLIP parameters for 8285 | SET TERMINAL CONSOLE_PORT_PROTOCOL |
| SET TERMINAL SLIP_ADDRESS |
| SET TERMINAL BAUD |
|
|
Configure LE server parameters (LECS and | SET LAN_EMUL CONFIGURATION_SERVER |
LES/BUS) for 8285 | SET LAN_EMUL SERVER |
|
|
Configure SNMP parameters for 8285 | SET COMMUNITY |
| SET ALERT |
|
|
Configure ATM media modules | SET MODULE |
|
|
Configure ATM ports | SET PORT |
|
|
Configure NNI connection between Hubs | SET LOGICAL_LINK |
|
|
Configure NNI connections ATM subnetworks | SET STATIC_ROUTE |
|
|
Configure ESI for ATM stations | SET ATM_ESI |
|
|
Configure PVCs and PVPs | SET PVC |
|
|
Configure TFTP parameters for download/upload | SET TFTP FILE_NAME |
| SET TFTP FILE_TYPE |
| SET TFTP SERVER_IP_ADDRESS |
| SET TFTP TARGET_MODULE |
|
|
Configure trace/dump facilities | SET TRACE |
|
|
