This soft copy for use by IBM employees only.
}
ACCESS
DESCRIPTION
″This variable controls the configuration of the functions in the control point.
This attribute cannot be set in the 8285, when read, on a 8285 functionsConfiguration is always equal to
When this attribute is set, the configuration of the functions is saved in the non volatile memory and the atm subsystem is automatically reset.
When
the dynamic routing function is active. The selection of the routes when a connection is established
will be automatic through the SSI ports.
The LAN emulation servers cannot be started if functionsConfiguration is equal to
When
The routing will be performed only through the defined static routes.
The ports cannot be set with the atm access equal to SSI. All the ports previously configured as SSI ports are
changed to UNI, when the
::= { base 8 }
traps OBJECT IDENTIFIER ::= { node 2 }
hello
SYNTAX INTEGER {
enabled (1), disabled (2)
}
ACCESS read-write STATUS mandatory
DESCRIPTION
″When disabled, the hello trap is neither sent.
When enabled, the hello trap can be sent by the agent when the appropriate trap condition is detected.″
::= { traps 1 }
physical OBJECT IDENTIFIER ::= { node 3 }
--Switch Control switchTable
