This soft copy for use by IBM employees only.

DESCRIPTION

The state of the SAAL for this interface as defined in

the Q.2110 Specification, Chapter 7.3.″ ::= { atmSaalConfEntry 4 }

atmSaalTimerPoll OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory

DESCRIPTION

Timer_POLL as defined in the Q.2110 Specification.

This timer is running in the active phase to assure that

the peer receiver is polled often enough to return its status.″

::= { atmSaalConfEntry 5 }

atmSaalTimerKeepAlive OBJECT-TYPE SYNTAX INTEGER

ACCESS read-only STATUS mandatory

DESCRIPTION

Timer_KEEP-ALIVE as defined in the Q.2110 Specification.

This timer is started when entering the transient phase.″ ::= { atmSaalConfEntry 6 }

atmSaalTimerNoResponse OBJECT-TYPE SYNTAX INTEGER

ACCESS read-only STATUS mandatory

DESCRIPTION

Timer_NO-RESPONSE as defined in the Q.2110 Specification. This timer indicates the maximum time interval during

which at least one STAT PDU needs to be received.″ ::= { atmSaalConfEntry 7 }

atmSaalTimerCC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory

DESCRIPTION

Timer_CC as defined in the Q.2110 Specification. Transmission of PDUs is protected by this timer during establishment and release of a connection and during

resynchronization or recovery.″ ::= { atmSaalConfEntry 8 }

atmSaalTimerIdle OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory

DESCRIPTION

Timer_IDLE as defined in the Q.2110 Specification.

This timer is started upon receipt of a STAT PDU when entering the idle phase (no POLL PDUs sent).″

::= { atmSaalConfEntry 9 }

atmSaalMaxCC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only

Appendix E. IBM ATM Campus Switch Private MIBs 241

Page 257
Image 257
IBM SG24-4817-00 manual Description