IBM SG24-4817-00 manual

This soft copy for use by IBM employees only.

For a point-to-point PVC, this value is always set to 0.″ ::= { atmPvcEpEntry 3 }

atmPvcEpRowStatus OBJECT-TYPE SYNTAX INTEGER { active (1),

notInService (2), notReady (3), createAndWait (5), destroy (6) }

ACCESS read-write STATUS mandatory

DESCRIPTION

″States values:

active: the PVC is operational

notInService: the PVC is failing

notReady: values are missing to be able to activate this PVC

Actions:

active: this requests to re-start a failing unicast PVC (status was notInService)

destroy: this requests to delete a unicast PVC.″ ::= { atmPvcEpEntry 4 }

atmPvcEpStatusCause OBJECT-TYPE SYNTAX INTEGER { noCause (1),

underModification (2), missingParameters (3), invalidParameters (4), uncompatibleParameters (5), internalFailure (6), pvcFailure (7), unavailableResource (8), remoteBusy (9),

retrying (10)

}

ACCESS read-only STATUS mandatory

DESCRIPTION

″A detailed cause for the current PVC status.″ ::= { atmPvcEpEntry 5 }

atmPvcEpRemAddress OBJECT-TYPE SYNTAX NetPrefix ACCESS read-write STATUS mandatory

DESCRIPTION

″The ATM address of the remote ATM switch where the PVC ends.

If none is specified, the ATM address of the target switch (local) is used and the PVC is confined to the target switch (local switch).″

::= { atmPvcEpEntry 6 }

atmPvcEpRemIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory

DESCRIPTION

Appendix E. IBM ATM Campus Switch Private MIBs 251