This soft copy for use by IBM employees only.

(Note that the number of subslot entries in this table is determined by the type of concentrator, not the type of module; for an Hub module in an IBM 8260 concentrator, there will still be 8 subslot entries.)″

::= { staticSummary 2 }

ssLastChangedEntry OBJECT-TYPE SYNTAX SsLastChangedEntry ACCESS not-accessible STATUS mandatory

DESCRIPTION

An entry for a particular slot/subslot address in the concentrator, indicating the value of SysUpTime at the time of the last detected change to any of

the information included in the corresponding staticSummaryEntry instance.″

INDEX

{ ssTlcSlotIndex, ssTlcSubSlotIndex }

::= {

ssLastChangedTable 1 }

SsLastChangedEntry ::=

SEQUENCE {

ssTlcSlotIndex INTEGER,

ssTlcSubSlotIndex INTEGER, ssTlcCurrentlyOccupied INTEGER,

ssTimeLastChanged TimeTicks

}

ssTlcSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory

DESCRIPTION

″The number of the slot to which this entry pertains.″ ::= { ssLastChangedEntry 1 }

ssTlcSubSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory

DESCRIPTION

The subslot number to which this entry pertains. For Hub concentrators, there is a single entry for each slot, with a subslot number of 1.

For IBM 8260 concentrators, the number 1 indicates

the motherboard, and daughterboards are numbered beginning with subslot 2.″

::= { ssLastChangedEntry 2 }

ssTlcCurrentlyOccupied OBJECT-TYPE SYNTAX INTEGER {

empty(1),

occupied(2)

}

ACCESS read-only STATUS mandatory

DESCRIPTION

The current configuration state of this slot/ subslot. Whether occupied or not, the ssTimeLastChanged field is still valid: if a

264ATM Workgroup Solutions: Implementing the 8285 ATM Switch

Page 280
Image 280
IBM SG24-4817-00 manual SsTlcSlotIndex, ssTlcSubSlotIndex