This soft copy for use by IBM employees only.
1.1.2What to do if operational code FLASH is corrupted.
If code download terminates abnormally then operational code FLASH
may become corrupted. If this happens then bridge can not forward frames, or respond to most configurator commands. However, bridge can still communicate with configurator to load operational code via the serial port.
1 - Select ″Load new code image via serial port″ from ″Utilities″ menu.
2 - Choose the image to load.
3 - Select OK.
The configurator will automatically determine that the FLASH is corrupted and print a message stating that fact.
1.2Configuration Utility Installation
Before you can use the ATM LAN Bridge Module Configuration Utility program you have to run the ATM LAN Bridge Module Configuration install setup program so it will work properly on your computer. You cannot just copy the files from the Installation disk to your hard disk. The files on the distribution disk are packed to save space. The install program unpacks those files and builds them on your working disk.
1.Make Windows′ ″ Program Manager″ the active window.
2.From Windows′ ″ Program Manager″, select ″File″, then select ″Run″ . This will open the ″Run″ dialog box.
Place the ATM LAN Bridge Module Configuration Utility Installation disk in your floppy drive. Type in the dialog box the
command that will run the install program.
If your floppy disk goes in your Drive ″A″, type:
A:INSTALL
If your floppy disk goes in your Drive ″B″, type:
B:INSTALL
Leave the ″Run Minimized″ box
3.After a brief moment you will be prompted by a dialog box to enter the desired location for the ATM LAN Bridge Module Configuration Utility. This is the location that you want your
Configuration files to be placed. It will suggest a drive and directory of ″C:\IBM8281″ .
If you want the ATM LAN Bridge Module Configuration program files installed on a different drive or directory, just click the pointer to the right of the characters you want to change, backspace over
the ones you want to erase, then type in the new designation.
4.The install program will unpack the necessary files and place them into your directory. The status of the operation will be displayed as the setup program does this work.
Appendix D. Hints and Tips for the ATM
