IBM SG24-4817-00 manual

This soft copy for use by IBM employees only.

″The backward Quality Of Service requested for this call.″

::= { atmSvcLogEntry 9}

atmSvcLogForwardBW OBJECT-TYPE SYNTAX INTEGER

ACCESS read-only STATUS mandatory

DESCRIPTION

″The forward bandwidth requested for this

call.″

::= { atmSvcLogEntry 10}

atmSvcLogBackwardBW OBJECT-TYPE SYNTAX INTEGER

ACCESS read-only STATUS mandatory

DESCRIPTION

″The backward bandwidth requested for this

call.″

::= { atmSvcLogEntry 11}

--SAAL Group

--This group defines support for the SAAL protocol.

atmSaal OBJECT IDENTIFIER ::= { atmSvc 2 }

-- This table defines the SAAL configuration and status.

atmSaalConfTable OBJECT-TYPE

SYNTAX SEQUENCE OF AtmSaalConfEntry ACCESS not-accessible

STATUS mandatory

DESCRIPTION

″This table contains basic information on the SAAL protocol for each signalling link defined per port.

Usually, there is only one signalling channel per interface

and thus one SAAL protocol definition entry per interface.″ ::= { atmSaal 1 }

atmSaalConfEntry OBJECT-TYPE SYNTAX AtmSaalConfEntry ACCESS not-accessible STATUS mandatory

DESCRIPTION

″Entries of atmSaalConfTable. Each entry corresponds to a pair of ATM interface, signalling channel.

A signalling channel is uniquely defined on each interface

by the VPI and VCI values allocated to it.″ INDEX { atmSaalConfIndex,

atmSaalConfSiVpi, atmSaalConfSiVci } ::= { atmSaalConfTable 1 }

AtmSaalConfEntry ::= SEQUENCE { atmSaalConfIndex

INTEGER, atmSaalConfSiVpi

INTEGER,

Appendix E. IBM ATM Campus Switch Private MIBs 239